SPS Auto Select MPPT Charge Controller 48/60/72/96/120/144V RED-80

Data Sheet
SPS MPPT Red Datasheet

This MPPT Solar Charge Controller is the best MPPT Charge Controller that extracts 99% power from panels and using interleaved switching technology it will convert the extra voltage to current.
However ,PWM Solar charge controller, doesn't extract full power from panels . It supports LA, SMF, Tubular, Solar batteries. It performs controlled charges and ensures longer battery life . In MPPT vs PWM test, MPPT charge controller circuit has >95% to 98% efficiency. This solar MPPT charge controller has been designed for Load Shedding mode, and you can connect your existing inverter or ups with it.

48 Voltage System
When the battery voltage reaches 56V it would disconnect your inverter from mains and entire load runs on battery & Solar. In evening, when solar power is low or battery voltage is below 46V, it will switch to mains.

Note: Please note the connection ways, connect the battery first, then connect the solar panel.

MPPT checks output of PV module, compares it to battery voltage then fixes what is the best power that PV module can produce to charge the battery and converts it to the best voltage to get maximum current into battery. It can also supply power to a DC load, which is connected directly to the battery. MPPT algorithm can be applied to both of them depending on system design. Normally, for battery system voltage is equal or less. MPPT solar charge controllers are useful for off-grid solar power systems such as stand-alone solar power system, solar home system and solar water pump system.

https://www.biggpanther.com/productview/sps-mppt-autoselect-cc-48-144v-red-80